3M Command - Medium Hanging Strips
3M Command - Medium Hanging Strips

3M Command - Medium Hanging Strips

$4.80

Hang your Midorie and Edelwhite Planters on the wall, with a clean look - without hooks sticking out.

Instructions for Midorie Planters (Lush, Fresh and Petite Cube):

1) Wipe clean the area on the wall, and allow to dry.

2) Remove the Plants from your Midorie Frame.

3) Press a pair of 3M strips together until they click.  However, if your wall is of a textured surface, it is advisable to apply the 3M strips separately (instead of pairs) on the wall and planter.  This makes it easier to press the strips down on the textured wall directly, ensuring a very secure adhesive contact.

4) Peel off the green liners from one side of each 3M strip-pair, then press them onto the back of your Midorie Frame.  It is important to align the strips on the plastic squares behind the Midorie Frame (refer to picture below)

5) Remove the liners on the other side of each 3M strip-pair, then press your Midorie Frame firmly on the wall for 30 seconds.  Be sure to use your fingers to press firmly against the plastic squares which the 3M strips are on.

6) Replace the Plants back into your Midorie Frame.

7) If you are rearranging your Midorie Frame on the wall in the future, hold the frame firmly and peel it off very slowly, removing from one side to the other of the frame.  The back of your Midorie Frame will look like this, when you unfasten it from the wall.

 

Instructions for Edelwhite Planters:

1) Wipe clean the area on the wall, and allow to dry.

2) Peel off the green liners from 10 pieces of 3M strips, and apply them in a square pattern along the back perimeter of your Edelwhite planter.  Press hard on the strips against your Edelwhite for 30 seconds.

3) Peel off the green liners from another 10 pieces of 3M strips, and apply them onto the wall, making sure the strips' positions correspond with those on your Edelwhite.  Press hard on the strips against your wall for 30 seconds.

4) Place your Edelwhite flat down, and pour 120ml of water into each of the 6 holes.

5) Slot the plants into your Edelwhite.

6) Wait for at least 1 hour, before mounting your Edelwhite frames onto the wall.

We offer consultation and wall-mounting service too.

 

*To remove strips from the wall, press firmly onto the strip, and pull the rounded 3M tab away from the strip, slowly.  The adhesive behind the strip will be stretched, and the strip will detach from the wall.

**Please do not use these hanging strips on wallpaper.